Friday 19 July 2013

My niece's T Shirt

A couple of months ago I decorated a t shirt for my nephew Laith. It was only a matter of time before I made another one for my niece, Alima. You can see the step by step tutorial of the t shirt for Laith on the Sizzix EU blog here.

For Laith I choose the Union Jack die and the Block Talk Alphabet, for Alima I chose the Owl and the Butterfly Kisses alphabet.

I hate waste, so I cut small (approx. 6" by 6") pieces of the material and iron them onto the exposed side of the Heat & Bond Ultra, which in my opinion is the best fusible interfacing that I have found for die cutting. 
As I am not the world best sewer I use the Ultra version, the one does not require post sewing. Hopefully, the Ultra version should withstand machine washing, something essential for a toddler!


Once the Heat and Bond has cooled down completely - very important - I die cut the bits and pieces of the Owl using different pieces of fabric placing the fabric side down facing foam side of the Bigz die. 
Then I placed the cut outs just to make sure I like the colours and patterns, checking that they work well. Also, it is the time were you ought sewn in the buttons.




Then I iron the Owl on to the Tshirt. Finally, I proceed to cut the letters to really personalise the T-Shirt, and once happy I press them on.








And here you got it, all ready to be worn!

-----

Hace un par de meses decore una camiseta para mi sobrino Laith. Era sólo cuestión de tiempo antes de que hiciera otra para mi sobrina, Alima. Puedes ver el tutorial paso a paso de la camiseta para Laith en el Sizzix UE blog aquí.

Para Laith elegi el troquel Union Jack y el Block Talk Alphabet, para Alima elegí el Búho y el alfabeto Butterfly Kisses.

Odio a los malgastar material, así que corté trozos pequeños (aprox. 6 "por 6") de las telas y las plancho en el lado expuesto del Heat&Bond Ultra, que en mi opinión es la mejor entretela adhesiva que he encontrado para usar con troqueles.
Como no soy muy buena cosiendo, uso la versión Ultra no requiere que sea cosido después. Esperemos que la versión Ultra soporte bien el lavado a máquina, algo esencial para un niño!

Una vez que el Heat & Bond se haya enfriado por completo - muy importante - corté los pedazos del búho con diferentes piezas de tela colocando la tela boca abajo, tocando al lado de espuma del troquel.
Entonces me puse los recortes sólo para asegurarse de que me gustan los colores y los diseños. Además, es el momento de coser los botones.

Entonces me plancho el búho a la camiseta. Por último, procedo a cortar las letras para personalizar realmente la camiseta, y una vez que me gusta como quedan, las plancho.

Y aquí lo tienes, todo listo para ser usada!

1 comment:

Hanes 54500 Tagless said...
This comment has been removed by a blog administrator.
Related Posts Plugin for WordPress, Blogger...